The Exclusive Materials Candy Store
.png)
Embossed Acoustical Ceiling Tiles and Wall Panels provide decorative and affordable options for traditional designs. These solid color and printed tiles and panels with raised designs allow you to add an extra layer of texture to any commercial design. Tiles are sized and cut to be installed in standard metal or vinyl lay-in ceiling grids. Panels and Tiles can be printed after embossing!
.JPEG)
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Alternating 9.80" and 1.06" slats, 0.5" space gap. Two slats for each size per panel.
The same veneer/laminate that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Alternating 2.480" and 1.06" slats, 0.25" space gap. Six (6) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Alternating 4.480" and 1.06" slats, 0.25" space gap. Four slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
.jpg)
.jpg)
.jpg)
.jpg)
Thirteen 1.06" slats, one 2.498" slat in middle, 0.50" space gap. Fifteen (total) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
ALSO NEW: Along with the newest additions to the Akupanel Fusion collection, we've added Horizontal Slatted Panel Designs.
With this look, we will have quite a few combinations of options for you – 18 to be exact. You can choose the width of both the “solid” panel AND the “slatted” panel. This means that these are made differently than all the previous versions of Akupanel. The solid area will be a single panel with its own PET backing, and all of the horizontal slats are applied to another backer separately. This means that each job will be unique, with color & layout combinations – and we’ll have to determine how many solid panels and slatted panels are needed to create a continuous look for the job. We’ll also recommend reveals on any area over 94 ½” tall working with solid veneered panels. When it comes to options, here is what you can expect for the layouts. To download a PDF of each layout, click here.
Solid Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Horizontal Slatted Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Slatted Panel Options: 1” slats & 3” slats (spacing of slats is not customizable at this time)
Specifications:
The panels obtain an absorption coefficient of 0.80* at a frequency of 1,000 HZ. This measurement is based on the raw PET material used in the creation of Resonance Art and Resonance Embossed printed and embossed ceiling tiles and wall panels.
A quote is based on the number of panel(s)/tiles. Please provide top & bottom length and left & right vertical dimensions. If printing is required, a sample of the image is preferred, but not required.
If printing on the baffles, vector files are preferred in a print ready PDF or ".ai" format, in any size, or scaled to finished size. For photographic or bitmap images we recommend a minimum of 300 dpi at actual size.
Embossed Acoustical Ceiling Tiles and Wall Panels provide decorative and affordable options for traditional designs. These solid color and printed tiles and panels with raised designs allow you to add an extra layer of texture to any commercial design. Tiles are sized and cut to be installed in standard metal or vinyl lay-in ceiling grids. Panels and Tiles can be printed after embossing!
NEW: We’re happy to announce a newer additions of Akupanel Fusion that will have multiple style options, configurations and color choice combinations. In addition, new models that can utilize horizontal slats in tandem with larger solid veneer-covered blocks
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5Mx1.0
13 1.06" Slats
1 2.498" Slat in middle
1/2" gap
Akupanel 4.5x1.0
Alternating 4.480" and 1.06" Slats
1/4" gap
4 slats each size
Akupanel 10 x 1.0
Alternating 9.80" and 1.06" Slats
1/2" gap
2 slats each size
Specifications:
The panels obtain an absorption coefficient of 0.80* at a frequency of 1,000 HZ. This measurement is based on the raw PET material used in the creation of Resonance Art and Resonance Embossed printed and embossed ceiling tiles and wall panels.
A quote is based on the number of panel(s)/tiles. Please provide top & bottom length and left & right vertical dimensions. If printing is required, a sample of the image is preferred, but not required.
If printing on the baffles, vector files are preferred in a print ready PDF or ".ai" format, in any size, or scaled to finished size. For photographic or bitmap images we recommend a minimum of 300 dpi at actual size.
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Name | Dimensions |
|---|---|
| Pictura Edge Trim | 3/4" x 3/4" x 84" inches |
| Pictura Baseboard | 3/4" x 4" x 84" inches |
| Pictura Exterior Corner | 3/4" x 2-1/4" x 84" inches |
| Pictura Interior Corner | 3/4" x 2-1/4" x 84" inches |
Weight, coverage and dimensions may vary depending on finish and the natural expansion and contraction of wood.
Fire retardant add-on is available, contact us for a quote.
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Color | Surface Treatment and Finish | Surface Treatment and Finish |
|---|---|---|
| Darkened Walnut | Walnut | Lacquer Matte |
| Raw Walnut | Walnut | Lacquer Matte |
| Noir | White Oak | Light Wire-Brush, Lacquer |
| Soft White | White Oak | Light Wire-Brush, Lacquer |
| Natural | White Oak | Light Wire-Brush, Lacquer |
| Name | Dimensions |
|---|---|
| Intervals Edge | 3/4" x 1" x 108" inches |
| Intervals Baseboard | 1" x 4" x 108" inches |
| Interbals Exterior Corner | 1" x 2-1/2" x 108" inches |
| Intervals Interior Corner | 1" x 2-1/2" x 108" inches |
| Name | Dimensions |
|---|---|
| Intervals Edge | 3/4" x 1" x 119" inches |
| Intervals Baseboard | 1" x 4" x 119" inches |
| Interbals Exterior Corner | 1" x 2-1/2" x 119" inches |
| Intervals Interior Corner | 1" x 2-1/2" x 119" inches |
Weight, coverage and dimensions may vary depending on finish and the natural expansion and contraction of wood.
Fire retardant add-on is available, contact us for a quote.
.png)
.png)
.png)
.png)
.png)
.png)
.png)
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Akupanel 2.5x1.0
Alternating 2.480" and 1.06" Slats
1/4" gap
6 slats each size
Alternating 9.80" and 1.06" slats, 0.5" space gap. Two slats for each size per panel.
The same veneer/laminate that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Alternating 2.480" and 1.06" slats, 0.25" space gap. Six (6) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Alternating 4.480" and 1.06" slats, 0.25" space gap. Four slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
Thirteen 1.06" slats, one 2.498" slat in middle, 0.50" space gap. Fifteen (total) slats for each size per panel.
The same veneer that is on the face of the Akupanel can also be sold separately to highlight your design.
Size: 24"x94.5"
Material: PET Polyester Fiber, MDF, Wood Veneer.
*Pattern sizes and colors may vary from actual product samples depending on the equipment and software on which images are viewed. Please view an actual product sample prior to specifying.
ALSO NEW: Along with the newest additions to the Akupanel Fusion collection, we've added Horizontal Slatted Panel Designs.
With this look, we will have quite a few combinations of options for you – 18 to be exact. You can choose the width of both the “solid” panel AND the “slatted” panel. This means that these are made differently than all the previous versions of Akupanel. The solid area will be a single panel with its own PET backing, and all of the horizontal slats are applied to another backer separately. This means that each job will be unique, with color & layout combinations – and we’ll have to determine how many solid panels and slatted panels are needed to create a continuous look for the job. We’ll also recommend reveals on any area over 94 ½” tall working with solid veneered panels. When it comes to options, here is what you can expect for the layouts. To download a PDF of each layout, click here.
Solid Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Horizontal Slatted Panel Sizes: 6” wide, 12” wide or 24” wide (all 94 ½” tall)
Slatted Panel Options: 1” slats & 3” slats (spacing of slats is not customizable at this time)
.png)
.png)
