1189 White Streak
1189 White Streak
*Colors and scale displayed may vary from actual product depending on the equipment and software on which images are viewed and printed. It is important to ALWAYS request a sample prior to specifying.
OCTOLAM decorative laminates are supplied for both residential and commercial use. OCTOLAM decorative laminates are
suitable for application to interior surfaces where a decorative wear stain and impact resistant surface is required. Depending on the
particular laminate chosen applications can include countertops, tabletops, furniture, vanities, store fixtures, wall panels, laminate
doors and cabinets, partitions, and elevator cabs.
OCTOLAM decorative laminates are not recommended for exterior use or direct application to plastered walls, gypsum
wallboard or concrete walls. Do not use OCTOLAM decorative laminates in areas exposed to temperatures in excess of 275°F
(135°C). Fabrication should not be done in an air temperature of less than 65°F (18°C). Materials should be allowed to acclimatize to
the surrounding temperature before fabrication can proceed. Do not expose Octolam to extremes in humidity, temperatures higher than
135°C for substantial periods of time, or intense, continuous, direct sunlight. Slight variations in colour are normal, especially from
one production run to another, but are not detrimental to the overall appearance.
1189
White Streak
Click on image to view full sheet
*Colors and scale displayed may vary from actual product depending on the equipment and software on which images are viewed and printed. It is important to ALWAYS request a sample prior to specifying.
OCTOLAM decorative laminates are supplied for both residential and commercial use. OCTOLAM decorative laminates are
suitable for application to interior surfaces where a decorative wear stain and impact resistant surface is required. Depending on the
particular laminate chosen applications can include countertops, tabletops, furniture, vanities, store fixtures, wall panels, laminate
doors and cabinets, partitions, and elevator cabs.
OCTOLAM decorative laminates are not recommended for exterior use or direct application to plastered walls, gypsum
wallboard or concrete walls. Do not use OCTOLAM decorative laminates in areas exposed to temperatures in excess of 275°F
(135°C). Fabrication should not be done in an air temperature of less than 65°F (18°C). Materials should be allowed to acclimatize to
the surrounding temperature before fabrication can proceed. Do not expose Octolam to extremes in humidity, temperatures higher than
135°C for substantial periods of time, or intense, continuous, direct sunlight. Slight variations in colour are normal, especially from
one production run to another, but are not detrimental to the overall appearance.